How to Fix Your Slice Without Changing Your Swing

A slice can turn a promising tee shot into a search party in a hurry. And while swing path and clubface position usually deserve some of the blame, they aren’t the only things influencing where the ball goes.

Your driver can also help straighten things out.

The right head design, weight placement, loft and hosel setting can all encourage a more leftward ball flight for a right-handed golfer. In some cases, the solution may be as simple as adjusting the driver already in your bag rather than changing your swing.

From built-in draw-bias models such as the Callaway Max D, Cobra OPTM Max-D and PING SFT to adjustable options including the Titleist GT2 and TaylorMade’s 2026 driver platform, here are several equipment changes that can give slicers a better chance of finding the fairway.

Start With a Driver Designed to Promote a Draw

For golfers who regularly watch drives peel to the right, one of the easiest places to start is with a head that already has draw bias built into its design.

The Callaway Max D uses internal weighting that favors a draw, giving golfers help before making any additional adjustments. Its adjustable hosel provides another tool, with the D setting offering an opportunity to encourage an even more leftward flight.

The Cobra OPTM Max-D takes a visible approach by positioning weight in the heel. Moving the center of gravity toward that side of the head can make it easier for the face to rotate through impact. Cobra’s FutureFit33 hosel adds another layer of tuning, with additional loft and a more upright setting among the options that can help promote a draw.

PING approaches the same problem with its SFT, short for Straight Flight Technology. Draw bias is already incorporated into the head, while a movable weight includes a Draw+ position that moves additional mass toward the heel. Golfers can also use PING’s adjustable sleeve to fine-tune loft and lie, with added loft generally being the better direction for players trying to reduce a slice.

These models won’t replace good mechanics, but they give golfers equipment that is working in the same direction they want the ball to travel.

Your Adjustable Hosel May Be the Easiest Place to Start

Already own a relatively recent driver? Take a look at the hosel settings before making any changes to your setup.

Many modern drivers allow golfers to change loft, lie or both. Those adjustments affect more than launch height. Increasing loft can also make the face sit more closed, while a more upright lie can encourage the clubface to point farther left dynamically for a right-handed player.

If the adapter actually includes a Draw setting, that makes things easy. When it doesn’t, look for settings that add loft or indicate UPRT or upright.

For golfers trying to counter a pronounced slice, it can be helpful to start with the higher-loft and more upright settings, then adjust from there based on the resulting ball flight.

That makes the driving range the perfect testing ground. Make one adjustment at a time, hit several shots and pay attention not only to curvature but also launch, contact and start direction.

The Titleist GT2 Shows Why the Hosel Matters

The Titleist GT2 is a good example of a driver that may not immediately look like an obvious draw-bias option.

Its rear weighting doesn’t provide a simple heel position labeled “Draw,” but Titleist’s adjustable hosel gives golfers another route. Moving the GT2 from its stock A1 setting to A3 increases loft and makes the club more upright, creating a more draw-oriented setup.

That combination can help encourage the face to point farther left at impact without changing the weighting configuration of the head.

It also illustrates an important point: adjustability works differently from one manufacturer to another. Some brands spell out Draw, Fade or Upright directly on the adapter. Others use letters, numbers or a separate fitting chart.

Knowing what those settings actually do can unlock options that aren’t obvious when you first pick up the club.

Move Driver Weight Toward the Heel

Adjustable weights offer another useful tool.

The TaylorMade Qi4D driver family offers a four-weight system that provides another way to influence ball flight. For the strongest draw-oriented configuration, the heavier weights can be positioned toward the heel, the side of the head closest to the shaft.

Why does that matter?

Shifting mass toward the heel moves the center of gravity in the same direction and can make it easier for the face to rotate through impact. It can also change how the head reacts to impact location, creating gear effect that may help the ball curve back toward the left for a right-handed golfer.

Golfers with older drivers that use sliding tracks can apply the same basic principle: if the goal is more draw bias, move the adjustable mass toward the heel.

Just remember that weight settings can affect other parts of performance as well, so it’s worth testing the change rather than assuming more heel weight will automatically produce the best result.

Adding Loft Can Do More Than Raise Ball Flight

Loft may not be the first adjustment a slicer thinks about, but it can influence the direction of the shot as well as its height.

Adding loft through an adjustable sleeve generally closes the face relative to its lower-loft setting. That can give golfers who struggle to square the club another little push in the right direction.

More loft also adds backspin, which can reduce how dramatically sidespin influences the flight.

For a golfer playing a 9-degree driver, that might mean testing the adapter at 10, 11 or even 12 degrees if the head allows it. Pairing additional loft with an upright setting can create an even stronger draw-oriented configuration.

The important word is testing. Launch, spin and strike location still matter, and the setting that straightens the ball most effectively isn’t necessarily the one with the maximum adjustment.

Heel Strikes May Be Making the Slice Worse

Sometimes the issue isn’t only where the face is pointing.

Contact toward the heel can create gear effect that makes the ball curve farther to the right. That means a golfer could improve the result simply by finding the center of the face more often.

This is where equipment length and head design can become especially interesting.

A driver that feels easier to control may help move strike location away from the heel, and that can reduce curvature without requiring a dramatic change in the swing itself.

Before changing multiple settings, it can be useful to check impact location with face spray or impact tape. If most marks are clustered near the heel, you’ve found another clue.

A Mini Driver Can Be an Unexpected Option for Slicers

Mini drivers have become one of golf’s fastest-growing equipment categories, and they bring several characteristics that may appeal to players fighting a slice.

The first is shaft length. A shorter club can be easier to control, potentially making center contact more repeatable for golfers who tend to catch a full-size driver toward the heel.

Mini drivers also typically carry more loft, often in the 11- to 13-degree range before any hosel adjustments are made. That additional loft can help produce the more closed-face setup.

Then there’s the smaller head. With less distance from heel to toe, some golfers may find it easier to rotate the clubface and produce the shape they’re looking for.

A mini driver won’t be the answer for everyone, but for someone who wants more control off the tee and consistently struggles with heel contact, it’s a category worth testing.

Don’t Overlook a Professional Driver Fitting

There are a lot of adjustments here – loft, lie, movable weights, strike location and head design – and they all interact.

That’s where a professional fitting at Worldwide Golf can save a lot of trial and error. A fitter can see whether the slice is being magnified by an open face, heel contact, an unsuitable driver setting or some combination of the three, then test equipment and adjustments while watching actual launch-monitor data.

The goal isn’t simply to turn every shot into a draw. It’s to find a driver setup that makes the golfer’s typical swing more playable.

Find Drivers and Professional Fitting at Worldwide Golf

A slice may start with the swing, but equipment can influence how severe that curve becomes.

Before rebuilding everything from the ground up, experiment with the tools already available: add loft, test a more upright setting, move adjustable weight toward the heel and pay attention to where the ball is contacting the face. If it’s time for something different, today’s draw-biased and highly adjustable drivers provide even more ways to dial in ball flight.

CLICK HERE to shop drivers at Worldwide Golf or schedule a professional club fitting.